IMCOS-1530 Power amplifier
•
Dual power supply: 220 Vac/24 Vdc or
110 Vac/24 Vdc
• 4 x 100W output power
•
Forced ventilation by two separate fans,
thermostat controlled
•
Electric insulated contact, based on a
dedicated thermo-stabilized circuit, to
drive external/remote alarm devices
•
RS485 bus configurations for alarm
communication and equipment control
•
4 separate volume controls by
hardware device or software through
RS485. Volume remote control
by-pass functionality
• Front panel controls & indicators:
• general alarm red LED;
• for each of the four channels;
• power ON/OFF green LED;
• modulator ON yellow LED;
• overload red LED
• high temperature indicators
Request for quotation
Description
IMCOS 1530 is a 3 unit 19’’ rackmount power amplifier designed for Public Address, emergency notification and acoustic diffusion systems.
Type
approved for marine application by
ABS, CCS, DNV-GL, LR, RINA, BV
Material
Aluminium (front panel), galvanized steel sheet (body)
Colour RAL 9005 (front panel)
Mounting 19” rack
Dimensions 3 units 19” rack. width 485 mm, height 132 mm, depth 250 mm
Power supply
220 VAC +/- 10%, 50/60 Hz
24 VDC +/- 10%
110 VAC +/- 10%, 50/60 Hz (Option)
Peak consumption
Imax: 2,6A @ 220Vac;
Imax: 4,9A @ 110Vac;
Imax: 22 A @ 24Vdc;
Efficiency Better than 85%
nput sensitivity/
impedance
4 x 770 mVrms/27 kOhm unbalanced;
4 x 150 mVrms/22 kOhm balanced
Protection Voltage/current/temperature
Output power 4 x 100 WRMS
Output (volts) 100 volts
Signal noise ratio >60 dB
Weight 12 Kg
